Home >> Products >> S5-PCIe-DS


Dual Altera Stratix® V GX/GS PCIe Board with Quad QSFP+, DDR3, QDRII+, and RLDRAM3
  • NPP Network Packet Processing
  • HPC High Performance Computing
  • SP Signal Processing
  • NPP HPC  
  • C&D Compute & Data Center
  • M&A Military & Aerospace
  • GOV Government
  • I&T Instrumentation & Test
  • FIN Financial Services
  • B&V Broadcast & Video
  • C&D   GOV I&T FIN B&V

Configuration via Protocol (CvP) Supported

  • Two high-density Altera Stratix V GX/GS FPGAs
  • PCIe x16 interface supporting Gen1, Gen2, or Gen3
  • Four QSFP+ cages for 4 40GigE, 16 10GigE, or 4 QDR/FDR InfiniBand direct to the FPGAs
  • Eight SATA connectors, up to 6 Gbps each
  • Timestamping support
  • Board Management Controller for Intelligent Platform Management
  • Utility I/O includes: USB 2.0, RS-232, and JTAG
  • Memory options:
    • up to 64 GBytes of DDR3 SDRAM with ECC
    • up to 4 GBytes RLDRAM3
    • up to 144 MBytes QDRII+

BittWare’s S5-PCIe-DS (S5PE-DS) is a PCIe x16 card featuring two high-bandwidth, power-efficient Altera Stratix V GX or GS FPGAs. Designed for high-end applications, the Stratix V provides a high level of system integration and flexibility for I/O, routing, and processing. The S5PE-DS provides up to 64 GBytes of DDR3 SDRAM as well as options for RLDRAM3 and QDRII+. Providing additional flexibility are four front-panel QSFP cages, allowing 4 40GigE interfaces, 16 10GigE, or 4 QDR/FDR InfiniBand interfaces direct to the FPGAs’ built in PHYs for the lowest possible latency. With almost 2 million logic elements available (952,000 per FPGA), the board is ideal for high-performance computing, and with the reduced latency provided by the network interfaces, ideal for high frequency trading, military/government agency secure communications, and network processing applications.

Altera Stratix V GX/GS FPGA

The Altera Stratix V FPGA is optimized for high-performance, high-bandwidth applications with integrated transceivers (up to 14.1 Gbps) supporting backplanes and optical modules. It supports 1.6 Tbps of serial switching capability and up to 3,926 18 x 18 variable precision multipliers. The Stratix V also provides PCI Express x8 via a hard IP block and supports configuration by PCI Express using the existing PCI Express link in your application. For additional flexibility, the Stratix V supports transceiver and core reconfiguration on-the-fly while other portions of the design are running.

The two FPGAs are interconnected via 8 SerDes transceivers and 36 single-ended signals. The FPGAs are supported by BittWare’s FPGA Development Kit, which provides FPGA board support IP and integration.

I/O Interfaces

The S5PE-DS provides a variety of interfaces for high-speed serial I/O as well as debug support. Four QSFP+ cages are available on the front panel, each supporting 40GigE, 4 10GigE channels, or QDR/FDR InfiniBand. The QSFP+ SerDes channels are connected directly to the Stratix V FPGAs, thus removing the latency of external PHYs.

Eight SATA connectors are provided to connect external storage devices with the FPGAs via SerDes lanes. The Gen3 x16 PCIe interface is supported by a PCIe switch (PLX PEX8733), which provides on-chip DMA engines as well as a Gen3 x8 connection to each FPGA. USB 2.0, RS-232, and JTAG interfaces are available for debug and programming support. The board also supports timestamping with provision for a 1 PPS and reference clock input as well as RS-232 for connection to GPS or other time sources.

Memory and SODIMM Options

The S5PE-DS features an extremely flexible memory configuration, with 8 SODIMM sites (4 per FPGA) supporting DDR3 SDRAM, RLDRAM3, and QDRII+*. SODIMMs are available in the following configurations: up to 8 GBytes DDR3 with optional error-correcting codes (ECC); up to 36 MBytes QDRII+ (2 banks x18); or up to 512 MBytes RLDRAM3 (2 banks x18). The board also provides Flash memory for storing multiple FPGA images.

Board Management Controller

BittWare’s S5 boards feature an advanced system monitoring subsystem, similar to those typically found on today’s server platforms. At the heart of the board’s monitoring system lies a Board Management Controller (BMC), which accepts Intelligent Platform Management Interface (IPMI) messaging protocol commands. The BMC provides a wealth of features, including control of power and resets, monitoring of board sensors, FPGA boot loader, voltage overrides, configuration of programmable clocks, access to I2C bus components, field upgrades, and IPMI messaging. Access to the BMC is via PCIe, USB, or serial port. BittWare’s BittWorks II Toolkit also provides utilities and libraries for communicating with the BMC components at a higher, more abstract level, allowing developers to remotely monitor the health of the board.

BwMonitor in the BittWorks II Toolkit provides a view into the board management capabilities of your BittWare hardware.

Development Tools

BittWorks II Toolkit

BittWare offers complete software support for the S5PE-DS with its BittWorks II software tools. Designed to make developing and debugging applications for BittWare’s boards easy and efficient, the Toolkit is a collection of libraries and applications that provides the glue between the host application and the hardware. A variety of features allow developers to take full advantage of the Stratix V FPGA capabilities on the BittWare board, including FPGA control via PCIe, Flash programming, custom ISR scripts, and convenient control of FPGA loads. The Toolkit supports 32-bit, and 64-bit Windows and Linux platforms and can connect to the board via PCIe, Ethernet, or USB, providing a common API no matter the connection method.

FPGA Development Kit

BittWare’s FPGA Development Kit (FDK) provides FPGA board support IP and integration for BittWare’s Altera FPGA-based COTS boards. The FDK includes FPGA components that provide preconfigured physical interfaces, infrastructure, and examples, drastically cutting development time and easily integrating into existing FPGA development environments.

Working example projects are available for each board which illustrate how to move data between the board’s different interfaces. Supported interfaces include DDR3, DDR2, QDR2/+, PCIe, 10GigE, LVDS, SerDes, and Double Data Rate I/O. All example projects are available on BittWare’s Developer Site.

*QDRII+ is available on up to two SODIMM sites per FPGA. All other SODIMM options are supported on up to four sites per FPGA.

BittWare Firmware and Financial Solutions Partners

BittWare offers firmware for the Stratix V FPGA on the S5 family PCIe boards, targeted specifically for high frequency trading applications. BittWare’s FPGA Development Kit provides a solid base for your financial application, including the following:

  • 10GigE MAC
  • PCIe multi-channel DMA engines
  • DDR3 SDRAM and QDRII/II+ controllers

BittWare has also partnered with several companies to offer solutions for financial acceleration:

  • Algo-Logic: Market feed handler and low latency gateway libraries
  • Argon Design: Design services specializing in multimedia and FPGA-based high performance trading
  • Atomic Rules: Custom IP development, example UDP, precision timestamping, PCIe, networking
  • Enyx: UOE, TOE, book building IP, order management IP, Market Feed Handler
  • InDeLabs: Market Data Feed Handler and custom services
  • Intilop: Ultra low latency TOE, UOE, and MAC
  • LeWiz: Ultra low latency, multi-session TOE IP cores
  • PolyBus: Infiniband link layer and transport layer
  • Tamba Networks: Ultra low latency Ethernet and Interlaken cores

S5PE-DS Specifications

Board Specifications


  • 2 Altera® Stratix® V GX/GS FPGAs
  • 28 full-duplex, high-performance, multi-gigabit SerDes transceivers @ up to 14.1 Gbps (per FPGA)
  • Up to 952,000 logic elements (LEs) per FPGA
  • Up to 62 Mb of embedded memory per FPGA
  • 1.4 Gbps LVDS performance
  • Up to 3,926 18×18 variable-precision multipliers per FPGA
  • Embedded HardCopy Blocks


  • 4 SODIMM sites per FPGA: DDR3 SDRAM, RLDRAM3, or QDRII+ options
  • 256 MBytes of Flash memory for booting FPGA

PCIe Interface

  • PLX PEX8733 PCIe switch with on-chip DMA engines
  • x16 Gen1, Gen2, Gen3 to host
  • x8 Gen 1, Gen2, Gen 3 to each FPGA

USB Header

  • USB 2.0 interface for debug and programming FPGAs and Flash

Timestamp Header

  • 1 PPS input
  • Reference clock input
  • RS-232

Debug Utility Header

  • RS-232 port to Stratix V
  • JTAG debug interface to Stratix V

QSFP+ Cages

  • 4 QSFP+ cages on front panel connected directly to FPGAs via 16 SerDes (no external PHY)
  • Each QSFP+ supports 40GigE, 4 10GigE, or QDR/FDR InfiniBand interfaces

Serial ATA

  • 8 SATA connectors, connected to FPGAs

Board Management Controller

  • Voltage, current, temperature monitoring
  • Power sequencing and reset
  • Field upgrades
  • FPGA configuration and control
  • Clock configuration
  • I2C bus access
  • USB 2.0 and JTAG access
  • Voltage overrides


  • Full-length, standard-height, dual-slot PCIe x16 card
  • 312mm x 111.15mm
  • Max. component height: 34mm

Development Tools

System Development

  • BittWorks II Toolkit – host, command, and debug tools for BittWare hardware; source code porting kit also available

FPGA Development Kit

  • Physical interface components
  • Board, I/O, and timing constraints
  • Example Quartus projects
  • Software components and drivers

FPGA Development

  • Altera Quartus® II software

Accessory Boards

  • BittWare BWBO breakout board for debug
Block Diagram

RW Ruggedization
0U = Commercial (0C to 50C)*
AAAAA Stratix V A Family, HardIP, and Size
GXEA7 = Stratix V GXEA7†
GXEAB = Stratix V GXEAB*
GSMD5 = Stratix V GSMD5†
GSED8 = Stratix V GSED8*
B Stratix V A GXB Speed
1 = 14.1 Gbps
2 = 12.5 Gbps*‡
3 = 8.5 Gbps
CC Stratix V A Temp/Speed
C1= Commercial Temperature Range, Speed Grade 1
C2= Commercial Temperature Range, Speed Grade 2*
C3= Commercial Temperature Range, Speed Grade 3
DD Cluster A SODIMM 1
00 = None
D3 = DDR3 8GB x72*
Q2 = QDRII+ 36MB 2×18
R2 = RLDRAM3 256MB 2×18 †
R3 = RLDRAM3 512MB 2×18 †
EE Cluster A SODIMM 2
See options for “Cluster A SODIMM 1” (DD)
FF Cluster A SODIMM 3
00 = None
D3 = DDR3 8GB x72*
R2 = RLDRAM3 256MB 2×18 †
R3 = RLDRAM3 512MB 2×18 †
GG Cluster A SODIMM 4
See options for “Cluster A SODIMM 3” (FF)
HHHHH Stratix V B Family, HardIP, and Size
See options for Stratix V A (AAAAA)
I Stratix V B GXB Speed
1 = 14.1 Gbps
2 = 12.5 Gbps*‡
3 = 8.5 Gbps
JJ Stratix V B Temp/Speed
C1= Commercial Temperature Range, Speed Grade 1
C2= Commercial Temperature Range, Speed Grade 2*
C3= Commercial Temperature Range, Speed Grade 3
KK Cluster B SODIMM 1
00 = None
D3 = DDR3 8GB x72*
Q2 = QDRII+ 36MB 2×18
R2 = RLDRAM3 256MB 2×18 †
R3 = RLDRAM3 512MB 2×18 †
LL Cluster B SODIMM 2
See options for “Cluster B SODIMM 1” (KK)
MM Cluster B SODIMM 3
00 = None
D3 = DDR3 8GB x72*
R2 = RLDRAM3 256MB 2×18 †
R3 = RLDRAM3 512MB 2×18 †
NN Cluster B SODIMM 4
See options for “Cluster B SODIMM 3” (MM)
O Misc. Configuration
0 = Standard
P Oscillator
S = Standard*
Q Heatsink
B = FPGA Fansink*
E = FPGA Heatsink
R Power Supply
R – Right-Angle Connector*
V – Vertical Connector
S Envelope Assembly
6 = RoHS 6/6*

SODIMM Compatibility Table

SODIMM Site 1 Site 2 Site 3 Site 4
DDR3 Yes Yes Yes Yes
QDRII+ Yes** Yes** No
RLDRAM Yes Yes Yes Yes

* Default
† Contact BittWare for availability.
‡ On GXEAB devices, the Stratix V GXB speed is 11.2 Gbps.
** SODIMM site 1 supports QDRII+ SODIMM Q2SO-Cfg 1 only, and site 2 supports Q2SO-Cfg2 only.

Software Support
BittWare Stratix V Board Software Support
BittWare Feature Stratix V Family
Program Flash
via PCIe
via USB

Configure FPGA From Flash
 via PCIe
via USB

Configure FPGA Directly via USB
Reset FPGA
via PCIe
via USB

Access FPGA Registers, Memory Spaces From User Applications
via PCIe
via USB

Virtual PCIe Hot-Swap
On-board JTAG Pod
Factory Backup Image with PCIe
Multiple User Images in Flash
Serial Number
via PCIe
via USB

MAC Addresses For Each Network Interface
via PCIe
via USB

BMC Voltage, Current, Temperature Sensors
via PCIe
via USB

BMC Clock Re-programming
via PCIe
via USB

BMC FPGA Core Voltage Override
via PCIe
via USB

Upgrade BMC Firmware
via PCIe
via USB

Quick-start Guide
User’s Manual
How-to Index
BMC User’s Guide

10G Ethernet
DDR3 Memory
BMC Host (without using BittWare drivers)

Why BittWare?

Quality & Life Cycle Management

Technology refresh capability with 10+ year supply, quality and timely manufacturing and a trustworthy supply chain. ISO 9000 certified FPGA platform vendor with a history of proven, successful, on-time supply.

Learn more.

FPGA Board & Integrated Platforms

Standard form factor boards including PCIe, VPX, VME, AMC and XMC.  Bittware's board and integrated platforms support configurable hardware options, data conversion I/O options, and air-cooled and rugged operation.

Learn more.

Value Added Products for FPGAs

FPGA application development using HDL and OpenCL workflows, FPGA Development Kits (FDKs), and complete application solutions from BittWare's technology partners leveraging the technical expertise of industry leaders.

Learn more.

System Development & Integration

Host development tools, Board Support Packages (BSPs), Baseboard Management Controller and integrated "boxes" including chassis, backplanes and all other items necessary for a full solution to get to market more quickly.

Learn more.

Your Name (required)

Your Email (required)


Your Message

Please leave this field empty.

Your Name (required)

Your Email (required)


Your Message

Please leave this field empty.